It is used to test the width of the circuit line, the distance
between lines on the PCB boards and the lines on the semi-finished
PCB Boards after etching and developed(before green oil), it also
used to detect the diameter of round holes , blind holes ,and arcs
, even the distance between holes to the edge of line. The machine
is expanded to test the width and distance of IC chip circuit, the
width of the films and LCD circuit testing, and some other macro
1．The machine adopts granite table, which is stable and will not
scratch the boards.
2．It is equipped with high sensitivity colorized CCD, and the image
It uses red LD positioning to assure the testing dimension
It adopts continuously adjustable ring light LED, which can be
adjusted to various kinds of testing mode.
The magnification ratio is 70*450*adjustable data.
Software search the edge automatically, the width from the top to
the bottom can be marqueed, which makes the testing more accurate
There are two kinds of modes in the software, one is administrator
mpde and the other one is operator mode, which is easy to manage
The software integrate automatically saving testing drawings and
together, and can output the data to Excel and word files
The unit of test report is adjustable and selectable.
The software is simple to use, and the mouse has three keyboards.
The software integrates Chinese , English and traditional Chinese
3. Technical Parameter
|Optical magnification||0.7×~4.5×continuously adjustable|
|focusing mode||manually(micro-tunning and coarse tunning )|
|light source||LED lightness continuously adjustable|
|The maximum width can be measured|
|Out size||960 mm×700 mm ×1300mm (L x W x H)|
|power||AC 220V±10℅ /50Hz/ 10A|